Car Dismantling Shears
Application：
Dismantling of various scrapped cars and steel.
Features：
1.Use Swedish Hardox 500,light weight and wear-resistant.
2.The pins use 42CrMo alloy steel, built-in oil passage,high strength and good toughness. Adopt Swiss imported rotary motor.
3.Big hydraulic cylinder adopts honing pipe and imported NOK oil seal, with short working period, long lifetime.
4.The cutter is made of ware-resistant alloy steel, which is resistant to high temperature and deformation.
Model we can supply
| Item/Model | Unit | GT200 | GT225 | GT300 |
| Suitable Excavator | ton | 15-18 | 20-27 | 27-33 |
| Weight | kg | 1600 | 2000 | 2500 |
| Opening With Jaw | mm | 540 | 680 | 850 |
| Overall Length | mm | 2000 | 2600 | 2900 |
| Blade Length | mm | 240×2 | 240×4 | 240×4 |
| Max Cutting Force | ton | 208 | 259 | 354 |
| Driving Pressure | kgf/cm² | 320 | 320 | 320 |
| Driving Flow | L/min | 180-230 | 200-250 | 250-300 |
| Motor Set Up Pressure | kgf/cm² | 160 | 160 | 160 |
| Motor Flux | L/min | 36-40 | 36-40 | 36-40 |
| Frequency | r/min | 16-18 | 16-18 | 16-18 |
